在 macOS Sonoma、macOS Ventura、macOS Monterey、macOS Big Sur 和 macOS Catalina 上运行 Aperture、iPhoto 和 iTunes。macOS Mojave 上的 Xcode 11.7。macOS Mojave 或 macOS High Sierra 上的 Final Cut Pro 7、Logic Pro 9 和 iWork ’09。
在 macOS Sonoma、macOS Ventura、macOS Monterey、macOS Big Sur 和 macOS Catalina 上运行 Aperture、iPhoto 和 iTunes。macOS Mojave 上的 Xcode 11.7。macOS Mojave 或 macOS High Sierra 上的 Final Cut Pro 7、Logic Pro 9 和 iWork ’09。
Retroactive only receives limited support. You should transition from Retroactive to a wide range of supported apps, many of which are built into macOS or free to download. Learn how to transition from Retroactive to supported apps.
Run Aperture, iPhoto, and iTunes on macOS Sonoma, macOS Ventura, macOS Monterey, macOS Big Sur, and macOS Catalina. Xcode 11.7 on macOS Mojave. Final Cut Pro 7, Logic Pro 9, and iWork ’09 on macOS Mojave or macOS High Sierra.
打开｜Opening Retroactive
下载Retroactive后，双击打开。macOS 可能会提示您“无法打开追溯，因为它来自身份不明的开发者”。这是完全正常且符合预期的。After downloading Retroactive, double click to open it. macOS may prompt you “Retroactive cannot be opened because it is from an unidentified developer.” This is completely normal and expected.
要打开Retroactive，请右键单击Finder中的Retroactive应用程序，然后单击“打开”，如下所示。To open Retroactive, right-click on the Retroactive app in Finder, and click “Open” as shown below.
If you right-clicked when opening Retroactive for the first time, you need to right-click for a second time. If Retroactive still can’t be opened, check your GateKeeper settings under the General tab in System Preferences > Security & Privacy. Click “Open Anyway” to open Retroactive.
Retroactive will not harm your Mac. This alert only shows up because Retroactive is not notarized. Retroactive is open source, so you can always examine its source code to make sure it’s safe.
选择一个应用程序｜Picking an app
在 macOS Sonoma、macOS Ventura、macOS Monterey、macOS Big Sur 和 macOS Catalina 上，Retroactive 可以解锁 Aperture 和 iPhoto，或安装 iTunes。选择您要运行的应用程序。如果您想从此处运行多个应用程序，请选择其中任何一个。稍后您始终可以返回到此屏幕。
On macOS Sonoma, macOS Ventura, macOS Monterey, macOS Big Sur, and macOS Catalina, Retroactive can unlock Aperture and iPhoto, or install iTunes. Pick the app you want to run. If you want to run multiple apps from here, pick any one of them. You will always be able to get back to this screen later.
在 macOS Mojave 和 macOS High Sierra 上，Retroactive 还可以解锁 Final Cut Pro 7、Logic Pro 9（实验性）、Xcode 11.7（需要 macOS Mojave）并修复 iWork ’09。
On macOS Mojave and macOS High Sierra, Retroactive can also unlock Final Cut Pro 7, Logic Pro 9 (experimental), Xcode 11.7 (requires macOS Mojave), and fix iWork ’09.
我将使用 Aperture 作为示例，但相同的过程也适用于 iPhoto、iTunes、Final Cut Pro 7、Logic Pro 9、Xcode 11.7 和 iWork ’09。
I’ll use Aperture as the example, but the same process also works for iPhoto, iTunes, Final Cut Pro 7, Logic Pro 9, Xcode 11.7, and iWork ’09.
找到应用程序或选择版本｜Locating the app or choosing a version
Retroactive 将自动扫描您的 Mac 以查找现有的 Aperture、iPhoto、Final Cut Pro 7、Logic Pro 9、Xcode 11.7 或 iWork ’09 安装。如果 Retroactive 已找到您要运行的应用程序，请跳至下一部分。
如果 Retroactive 无法找到现有安装，系统会要求您从 App Store 的已购买列表中下载它，或者从 DVD 光盘重新安装。您还可以在您拥有的另一台 Mac 上找到该应用程序，然后将其通过 AirDrop 传输到这台 Mac，或从 Time Machine 备份中恢复该应用程序。
Retroactive will automatically scan your Mac to locate an existing Aperture, iPhoto, Final Cut Pro 7, Logic Pro 9, Xcode 11.7, or iWork ’09 install. If Retroactive has already located the app you would like to run, skip to the next section.
If Retroactive can’t locate an existing install, you’ll either be asked to download it from the Purchased list in App Store, or re-install it from a DVD disc. You can also find the app on another Mac you own, then AirDrop it to this Mac, or restore the app from a Time Machine backup.
如果您选择 iTunes，Retroactive 会询问您要安装哪个版本，然后自动为您下载并安装。
iTunes 12.9.5 支持深色模式和大多数 DJ 应用程序。
iTunes 12.6.5 支持铃声和 iTunes U。
iTunes 11.4 具有经典的外观。
iTunes 10.7 支持 CoverFlow。
如果您不知道要安装哪个版本，请保留默认设置并单击“继续”。
If you chose iTunes, Retroactive will ask you which version to install, then automatically download and install it for you.
iTunes 12.9.5 supports Dark Mode and most DJ apps.
iTunes 12.6.5 supports Ringtones and iTunes U.
iTunes 11.4 has a classic look.
iTunes 10.7 supports CoverFlow.
If you don’t know which version to install, keep the default setting and click “Continue”.
After installing iTunes, Retroactive will ask you about iPod syncing. If you need to sync with iPod devices, click “Enable Full Disk Access”, and follow on-screen instructions provided by Retroactive.
就是这样！您现在可以使用该应用程序。That’s it! You can use the app now.
使用应用程序｜Using the app
成功修改或安装应用程序后，您就可以尽情使用它了。After successfully modifying or installing the app, you can play with it to your heart’s content.
All Aperture features should be available except for playing videos, exporting slideshows, Photo Stream, and iCloud Photo Sharing. If RAW photos can’t be opened, you need to reprocess them.
All iPhoto features should be available except for playing videos, exporting slideshows, Photo Stream, and iCloud Photo Sharing.
All features should work for iTunes 12.9.5.
Most features should work for iTunes 12.6.5. Use iTunes 12.9.5 or Finder to back up your device instead. Use Apple Configurator 2 to download iOS apps on your Mac.
Movies and TV Shows downloaded from the iTunes Store may be unable to play in iTunes. Download or play them in the TV app instead.
Some dialogs in iTunes may display a crossed-out iTunes icon. This is purely cosmetic and has no functional impact.
All Final Cut Pro 7 features should work.
Support for Logic Pro 9 is experimental. You may see frequent freezes and hangs.
Most Xcode 11.7 features should work.
After fixing iWork ’09, text format and paragraph alignment controls in the format bar should appear correctly. Scroll bars will no longer appear behind the document canvas.
After fixing Keynote ’09 with Retroactive, you can normally play slideshows.
After fixing Pages ’09 with Retroactive, typing and scrolling in Pages ’09 should be more responsive.
与设备同步｜Syncing with a device
如果您将 Apple 设备连接到 Mac，并且在 iTunes 中看不到任何内容，或者“该设备正被这台计算机上的其他用户使用”：
断开设备与 Mac 的连接，但保持 iTunes 打开。
单击菜单栏上的聚光灯图标（放大镜）。
输入“Terminal”并按回车键打开终端应用程序。
killall AMPDevicesAgent在终端窗口中输入，然后按回车键。
将 Apple 设备连接回您的 Mac。
如果您将 Apple 设备连接到 Mac，并看到“iTunes 无法读取设备的内容。转到设备偏好设置中的“摘要”选项卡，然后单击“恢复”以将此设备恢复为出厂设置”：
If you connect an Apple device to your Mac, and either see nothing in iTunes, or “The device is in use by another user on this computer”:
Disconnect the device from your Mac, but keep iTunes open.
Click on the Spotlight icon (magnifying glass) on the menu bar.
Type “Terminal” and press return to open the Terminal app.
Enter killall AMPDevicesAgent in the Terminal window, and press return.
Connect the Apple device back to your Mac.
If you connect an Apple device to your Mac, and see “iTunes cannot read the contents of the device. Go to the Summary tab in device preferences and click Restore to restore this device to factory settings”:
You may have installed iTunes with Retroactive 1.4 or earlier.
Once you reinstall iTunes using the latest version of Retroactive, iTunes should be able to read the contents of your device as expected.
At the end of the installation process, Retroactive will ask you about iPod syncing. If you need to sync with iPod devices, click “Enable Full Disk Access”.
If you try to enable VoiceOver for iPod shuffle, but see “iTunes was unable to install the VoiceOver Kit. An unknown error occurred (1701)”:
Directly download the VoiceOver 1.4.2 installer here.
Install the downloaded VoiceOver.pkg.
Quit and re-open iTunes.
下载 iOS 应用程序｜Downloading iOS Apps
从 2020 年 4 月开始，您将需要使用Apple Configurator 2在 Mac 上下载 iOS应用。
Starting from April 2020, you’ll need to use Apple Configurator 2 to download iOS apps on your Mac.
Final Cut Pro 7 和 Apple Pro 视频格式更新｜Final Cut Pro 7 and the Apple Pro Video Formats update
如果您通过软件更新安装 Apple Pro Video Formats 更新，您可能需要按照这些说明重新启用 Final Cut Pro 7。
If you install Apple Pro Video Formats update from Software Update, you may need to follow these instructions to re-enable Final Cut Pro 7.
在 Aperture 中重新处理 RAW 照片｜Reprocessing RAW photos in Aperture
在 Aperture 中，如果您的 RAW 照片显示为“不支持的图像格式”，请打开“照片”菜单，单击“重新处理原始… ”，然后重新处理所有照片。重新处理 RAW 照片后，您将能够像以前一样预览和调整它们。
In Aperture, if your RAW photos show up as “Unsupported Image Format”, open the “Photos” menu, click on “Reprocess original…”, and reprocess all photos. After reprocessing your RAW photos, you will be able to preview and adjust them as before.
提示Tips：
如果重新处理后某些 RAW 照片仍然显示为“不支持的图像格式”，请重复上述过程以重新处理所有照片。换句话说，您可能需要将所有照片重新处理两次。
If some RAW photos still show up as “Unsupported Image Format” after reprocessing, repeat the process above to reprocess all photos again. In other words, you may need to reprocess all photos twice.
在 VMware Fusion 中安装 Final Cut Pro 7 的解决方法｜Workaround to install Final Cut Pro 7 in VMware Fusion
如果您没有 2019 年末之前发布的 Mac，您仍然可以在 VMware Fusion 中安装 Final Cut Pro 7，以将现有 Final Cut Pro 7 项目导出到 XML 文件中。这允许 SendToX、DaVinci Resolve、Media Composer 和 Premiere Pro 打开它们。
在 VMware Fusion 中安装 Final Cut Studio 安装程序后，右键单击“安装 Final Cut Studio.pkg”>“显示原始文件”，然后将 FinalCutStudio.mpkg 和软件包复制到 VMware Fusion 的桌面
右键单击复制的 FinalCutStudio.mpkg > 显示包内容 > 资源
右键单击“Requirements Checker.app”>“显示包内容”>“内容”>“资源”
删除minsys.plist
双击修改后的FinalCutStudio.mpkg开始安装
照常使用追溯
要使用时间线和预览等编辑功能，请在 2019 年末之前发布的真实旧版 Mac 上安装 macOS Mojave，然后照常运行 Retroactive。
If you don’t have a Mac released before Late 2019, you can still install Final Cut Pro 7 in VMware Fusion to export existing Final Cut Pro 7 projects into XML files. This lets SendToX, DaVinci Resolve, Media Composer, and Premiere Pro open them.
Install macOS Mojave virtual machine with VMware Fusion. Other virtual machine software, such as Parallels Desktop, is not supported and will not work.
After mounting the Final Cut Studio installer in VMware Fusion, right click on Install Final Cut Studio.pkg > Show Original, then copy FinalCutStudio.mpkg and Packages to VMware Fusion’s Desktop
Right click on the copied FinalCutStudio.mpkg > Show Package Contents > Resources
Right click on Requirements Checker.app > Show Package Contents > Contents > Resources
Delete minsys.plist
Double click on the modified FinalCutStudio.mpkg to start the install
Use Retroactive as usual
To use editing features such as timeline and preview, install macOS Mojave on a real, older Mac released before Late 2019, then run Retroactive as usual.
If GateKeeper prevents you from running modified versions of your chosen app, temporarily disable GateKeeper in Terminal with sudo spctl --master-disable.
To learn more about how Retroactive works, take a technical deep dive.
Retroactive only receives limited support. You should transition from Retroactive to a wide range of supported apps, many of which are built into macOS or free to download.
*如果下载链接失效，请点击网页右下角ICON图标，索取可用链接，If the download link does not work, please click the ICON in the lower right corner of the webpage to request an available link.